[Woodworkers] Bread board ends

[gcw804 at aol.com]

 Smitty,
I've built a large work table for my wife and used a combo of  multiple mortises and tenons with a tongue and groove. I pinned the center, then pinned the ends with elongated holes in the tenons on the ends so the wood can move. 
Here is basically an example of what I did.
https://www.woodmagazine.com/woodworking-tips/techniques/joinery/breadboard


I hope this helps.
Gary Williams

    On Wednesday, October 30, 2024 at 06:09:24 PM EDT, Scott Rohan=Smith via Woodworkers <woodworkers at lists.sawdusters.org> wrote:   

 
I’m starting a project that has a couple of panels that need bread board ends. They’re pretty small panels so I’m not too worried about movement but just in case ... I’ve seen lots of different approaches to doing bread board ends, anybody got a favorite way of doing it?

  

TIA

  

Smitty aka Scott Rohan-Smith

Missoula, MT

  

Doh, a beer I want a beer

Ray, the guy who buys me beer

Me, the guy whom Ray buys beer

Fa, a long way to go for beer

So, I think I’ll have a beer

La, La la la la la la

Ti, no thanks I’ll have a beer

And that will bring us back to Doh! Doh! Doh!

  
_______________________________________________
I want to be one of my friends for a day so I can see how cool it is to hang out with me.
Woodworkers at lists.sawdusters.org

To unsubscribe from this list -
http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org

Address to contact the list ADMIN staff -
woodworkers-owner at lists.sawdusters.org
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20241031/c253459d/attachment-0001.htm>