[Woodworkers] Table update

[Ron Odum]

👍👍😁

On Wed, Feb 23, 2022, 4:07 PM Sid Hymes via Woodworkers <
woodworkers at lists.sawdusters.org> wrote:

> Used to have one of those rafter saws. Which we affectionately referred to
> as a widow-maker. Damn scarry to use up on a roof.
>
> On Wed, Feb 23, 2022 at 9:42 AM Dave Heitstuman via Woodworkers <
> woodworkers at lists.sawdusters.org> wrote:
>
>> Josh borrowed a beam saw from a buddy to cut the ends square.  The blade
>> on that thing is 16- 5/16” and it is one scary saw.  I can hear Joe now,
>> that’s not scary you should have seen…….  Anyway we got the ends cut
>> square, drilled in three 1” dowels on each end and attached the ends.  We
>> will reinforce the joint with metal strapping inset on the bottom, we
>> figure this is extra protection from somebody trying to lift it from the
>> ends.  It also might be a big waste of time………  The next step is to get it
>> flipped over and finish the bottom.  Stay tuned on where that ends up
>> going.
>>
>>
>>
>> 2Dave
>>
>>
>>
>>
>> _______________________________________________
>> I want to be one of my friends for a day so I can see how cool it is to
>> hang out with me.
>> Woodworkers at lists.sawdusters.org
>>
>> To unsubscribe from this list -
>> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>>
>> Address to contact the list ADMIN staff -
>> woodworkers-owner at lists.sawdusters.org
>
> _______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to
> hang out with me.
> Woodworkers at lists.sawdusters.org
>
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20220223/b1291e7e/attachment.html>