[Woodworkers] Table update
Sid Hymes
rusara at gmail.com
Wed Feb 23 13:58:27 PST 2022
Used to have one of those rafter saws. Which we affectionately referred to
as a widow-maker. Damn scarry to use up on a roof.
On Wed, Feb 23, 2022 at 9:42 AM Dave Heitstuman via Woodworkers <
woodworkers at lists.sawdusters.org> wrote:
> Josh borrowed a beam saw from a buddy to cut the ends square. The blade
> on that thing is 16- 5/16” and it is one scary saw. I can hear Joe now,
> that’s not scary you should have seen……. Anyway we got the ends cut
> square, drilled in three 1” dowels on each end and attached the ends. We
> will reinforce the joint with metal strapping inset on the bottom, we
> figure this is extra protection from somebody trying to lift it from the
> ends. It also might be a big waste of time……… The next step is to get it
> flipped over and finish the bottom. Stay tuned on where that ends up
> going.
>
>
>
> 2Dave
>
>
>
>
> _______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to
> hang out with me.
> Woodworkers at lists.sawdusters.org
>
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20220223/a0237efe/attachment.html>
More information about the Woodworkers
mailing list