[Woodworkers] TS vibration

[Ron Odum]

Ok... Thats what ive heard...Ill order one if nothing else works..  thanks.

On Sun, Feb 20, 2022, 7:40 PM Jim Cabernoch via Woodworkers <
woodworkers at lists.sawdusters.org> wrote:

> Just my two cents--but definitely try the link belt.  Did that on my
> jointer and it was like a new machine!!
>
> On Sun, Feb 20, 2022 at 5:30 PM Steve Bigelow via Woodworkers <
> woodworkers at lists.sawdusters.org> wrote:
>
>> Your new belt may have some set to it. Have you considered a link belt?
>>
>> On Sun, Feb 20, 2022, 5:24 PM Ron Odum via Woodworkers <
>> woodworkers at lists.sawdusters.org> wrote:
>>
>>> Thanks for the tip!  Ill try that tomorrow.. Got a lot of relearning to
>>> do...
>>>
>>>
>>> On Sun, Feb 20, 2022, 7:11 PM John McCaskill <jmccaskill at gmail.com>
>>> wrote:
>>>
>>>> You changed the blade & belt, cleaned & oiled the bearings. May be you
>>>> can align the blade with the miter slots? Here’s a link to a complete table
>>>> saw tuneup, if the vibration isn’t tolerable. I tuned mine so it passed the
>>>> nickel test (balance a nickel on edge on the table when the saw is running)
>>>> quite a few years back, and it’s still not too bad.
>>>>
>>>> https://woodgears.ca/delta_saw/alignment.html
>>>>
>>>> John
>>>>
>>>>
>>>>    - Everything is always okay in the end, if it's not, then it's not
>>>>    the end.
>>>>
>>>>
>>>> On Feb 20, 2022, at 7:02 PM, Ron Odum via Woodworkers <
>>>> woodworkers at lists.sawdusters.org> wrote:
>>>>
>>>> 
>>>> My Delta Contractors 10" saw used today for first time in 10+ years
>>>> ago. Seems to have excessive vibration since last used.
>>>> Installed new belt that may have made somewhat better...Cleaned&oiled
>>>> bearings on motor & blade shaft...Changed blade but still seems to have
>>>> excessive vibration than I remember.. Bearings seem OK...but not sure what
>>>> else it could be ????
>>>>
>>>> _______________________________________________
>>>> I want to be one of my friends for a day so I can see how cool it is to
>>>> hang out with me.
>>>> Woodworkers at lists.sawdusters.org
>>>>
>>>> To unsubscribe from this list -
>>>> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>>>>
>>>> Address to contact the list ADMIN staff -
>>>> woodworkers-owner at lists.sawdusters.org
>>>>
>>>> _______________________________________________
>>> I want to be one of my friends for a day so I can see how cool it is to
>>> hang out with me.
>>> Woodworkers at lists.sawdusters.org
>>>
>>> To unsubscribe from this list -
>>> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>>>
>>> Address to contact the list ADMIN staff -
>>> woodworkers-owner at lists.sawdusters.org
>>
>> _______________________________________________
>> I want to be one of my friends for a day so I can see how cool it is to
>> hang out with me.
>> Woodworkers at lists.sawdusters.org
>>
>> To unsubscribe from this list -
>> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>>
>> Address to contact the list ADMIN staff -
>> woodworkers-owner at lists.sawdusters.org
>
>
>
> --
>  Jim Cabernoch
> Owner
> Cabbies Woodshop
> Altadena, CA
> 626-296-1763
> Cabbies Woodshop.com
> Cabbies Woodshop on Facebook
>
>
>
>
>
> _______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to
> hang out with me.
> Woodworkers at lists.sawdusters.org
>
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20220220/6108b9c5/attachment.html>