[Woodworkers] TS vibration

[Steve Bigelow]

Your new belt may have some set to it. Have you considered a link belt?

On Sun, Feb 20, 2022, 5:24 PM Ron Odum via Woodworkers <
woodworkers at lists.sawdusters.org> wrote:

> Thanks for the tip!  Ill try that tomorrow.. Got a lot of relearning to
> do...
>
>
> On Sun, Feb 20, 2022, 7:11 PM John McCaskill <jmccaskill at gmail.com> wrote:
>
>> You changed the blade & belt, cleaned & oiled the bearings. May be you
>> can align the blade with the miter slots? Here’s a link to a complete table
>> saw tuneup, if the vibration isn’t tolerable. I tuned mine so it passed the
>> nickel test (balance a nickel on edge on the table when the saw is running)
>> quite a few years back, and it’s still not too bad.
>>
>> https://woodgears.ca/delta_saw/alignment.html
>>
>> John
>>
>>
>>    - Everything is always okay in the end, if it's not, then it's not
>>    the end.
>>
>>
>> On Feb 20, 2022, at 7:02 PM, Ron Odum via Woodworkers <
>> woodworkers at lists.sawdusters.org> wrote:
>>
>> 
>> My Delta Contractors 10" saw used today for first time in 10+ years ago.
>> Seems to have excessive vibration since last used.
>> Installed new belt that may have made somewhat better...Cleaned&oiled
>> bearings on motor & blade shaft...Changed blade but still seems to have
>> excessive vibration than I remember.. Bearings seem OK...but not sure what
>> else it could be ????
>>
>> _______________________________________________
>> I want to be one of my friends for a day so I can see how cool it is to
>> hang out with me.
>> Woodworkers at lists.sawdusters.org
>>
>> To unsubscribe from this list -
>> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>>
>> Address to contact the list ADMIN staff -
>> woodworkers-owner at lists.sawdusters.org
>>
>> _______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to
> hang out with me.
> Woodworkers at lists.sawdusters.org
>
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20220220/865fd090/attachment-0001.html>