[Woodworkers] Lamp

Chuck Steger chuck.steger at gmail.com
Fri Sep 6 18:27:34 PDT 2019


Karen,

   I’m breaking it up into 5 tiers. The top tier is really just a block of wood. I bought some cheap 2 x pine today. I’m going to do a quick mock-up before I tackle the final wood of walnut and cherry. Each tier will be like molding mitered together. My biggest concerns are the bottom 2 tiers because I’m not sure my TS can handle that thickness in a 45 degree miter. I think shaping a cove and oval that size will probably take lots of handwork. I don’t mind the work but my granddaughter didn’t give me the luxury of time J

 

   BTW, I sent the picture directly to Tom and Gary. I think the list is different because I never see my own posts any more.

 

Chuck

 

From: Woodworkers [mailto:woodworkers-bounces at lists.sawdusters.org] On Behalf Of KAREN MACK via Woodworkers
Sent: Friday, September 06, 2019 5:27 PM
To: A place where woodworkers talk about woodworking
Cc: KAREN MACK
Subject: Re: [Woodworkers] Lamp

 

I saw the original post and picture but didn't have anything to add at the time. Now I have a question. Are you planning to make this in four parts or as one piece like you would do for molding and then cut into mitered pieces?

 

Karen

On September 6, 2019 at 1:42 PM Greg via Woodworkers <woodworkers at lists.sawdusters.org> wrote: 

I saw one..

 

On Fri, Sep 6, 2019, 2:42 PM Gary C Williams via Woodworkers < woodworkers at lists.sawdusters.org> wrote: 


Tom,

 Do you really think there's a picture of the mysterious lamp? I never got it either. I even checked my spam folder and it wasn't there either. I think Chuck is pulling s joke like Joe used to do.

Gary Williams 

-----Original Message----- 
From: Tom Lovelace via Woodworkers < woodworkers at lists.sawdusters.org> 
To: A place where woodworkers talk about woodworking < woodworkers at lists.sawdusters.org> 
Cc: Tom Lovelace < t.lovelace at icloud.com> 
Sent: Thu, Sep 5, 2019 07:22 PM 
Subject: Re: [Woodworkers] Lamp 



I sure would like to see a photo of your mystery unit !

TomL 





On Sep 5, 2019, at 6:18 PM, Chuck Steger via Woodworkers < woodworkers at lists.sawdusters.org> wrote:

 

Sorry for all the questions but this build has me a little perplexed. I decided on a 8x10 base. I’m building a prototype. However, calling it a prototype is really a stretch. I’m building the 2 tiers out of ¾” pine (essentially making pine rectangular boxes). My thought was I could see what scale will look like with the first 2 tiers drawing in the coves and curves.  In reality, the first 2 tiers will probably be out of 12/4 stock. This has caused to me to think ahead to the real build. If I shape each piece first and then miter, I will have 4 pieces with a giant cove and 4 pieces with a large roundish shape. How do I clamp that? I can use strap clamps but they will just slide off. I’ve read about gluing small blocks on each piece to hold the straps on and then removing the blocks later. Haven’t ever done it but may have to.

 

I’m starting to think I really need to do a real prototype. I may go to one of the big box stores and get some pine posts (for the thickness).

 

Thanks for being my sounding board!

 

Chuck

 

From:  Chuck Steger [ <mailto:chuck.steger at gmail.com> mailto:chuck.steger at gmail.com] 
Sent: Thursday, September 05, 2019 1:39 PM
To: Woodworkers (Sawdusters) ( <mailto:woodworkers at sawdusters.org> woodworkers at sawdusters.org)
Subject: Lamp

 

Thanks for all the input. I think I will make a cardboard cutout to determine base size and then just go with that. I’ll do all the shaping while in pieces and then miter and glue. Probably will be a combination of band saw, spokeshave, plane (if possible), & a lot of sanding. Doubt I make the deadline though. 

 

Chuck

 

_______________________________________________ 
I want to be one of my friends for a day so I can see how cool it is to hang out with me. 
 <mailto:Woodworkers at lists.sawdusters.org> Woodworkers at lists.sawdusters.org 

To unsubscribe from this list - 
 <http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org 

Address to contact the list ADMIN staff - 
 <mailto:woodworkers-owner at lists.sawdusters.org> woodworkers-owner at lists.sawdusters.org

 

_______________________________________________ 
I want to be one of my friends for a day so I can see how cool it is to hang out with me. 
Woodworkers at lists.sawdusters.org 

To unsubscribe from this list - 
http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org 

Address to contact the list ADMIN staff - 
woodworkers-owner at lists.sawdusters.org

_______________________________________________ 
I want to be one of my friends for a day so I can see how cool it is to hang out with me. 
Woodworkers at lists.sawdusters.org 

To unsubscribe from this list - 
http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org 

Address to contact the list ADMIN staff - 
woodworkers-owner at lists.sawdusters.org

_______________________________________________ 
I want to be one of my friends for a day so I can see how cool it is to hang out with me. 
Woodworkers at lists.sawdusters.org 

To unsubscribe from this list - 
http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org 

Address to contact the list ADMIN staff - 
woodworkers-owner at lists.sawdusters.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20190906/3ed577d8/attachment.html>


More information about the Woodworkers mailing list