[Woodworkers] Lamp

Tom Lovelace t.lovelace at icloud.com
Thu Sep 5 16:22:15 PDT 2019


I sure would like to see a photo of your mystery unit !
TomL

> On Sep 5, 2019, at 6:18 PM, Chuck Steger via Woodworkers <woodworkers at lists.sawdusters.org> wrote:
> 
> Sorry for all the questions but this build has me a little perplexed. I decided on a 8x10 base. I’m building a prototype. However, calling it a prototype is really a stretch. I’m building the 2 tiers out of ¾” pine (essentially making pine rectangular boxes). My thought was I could see what scale will look like with the first 2 tiers drawing in the coves and curves.  In reality, the first 2 tiers will probably be out of 12/4 stock. This has caused to me to think ahead to the real build. If I shape each piece first and then miter, I will have 4 pieces with a giant cove and 4 pieces with a large roundish shape. How do I clamp that? I can use strap clamps but they will just slide off. I’ve read about gluing small blocks on each piece to hold the straps on and then removing the blocks later. Haven’t ever done it but may have to.
>  
> I’m starting to think I really need to do a real prototype. I may go to one of the big box stores and get some pine posts (for the thickness).
>  
> Thanks for being my sounding board!
>  
> Chuck
>  
> From: Chuck Steger [mailto:chuck.steger at gmail.com <mailto:chuck.steger at gmail.com>] 
> Sent: Thursday, September 05, 2019 1:39 PM
> To: Woodworkers (Sawdusters) (woodworkers at sawdusters.org <mailto:woodworkers at sawdusters.org>)
> Subject: Lamp
>  
> Thanks for all the input. I think I will make a cardboard cutout to determine base size and then just go with that. I’ll do all the shaping while in pieces and then miter and glue. Probably will be a combination of band saw, spokeshave, plane (if possible), & a lot of sanding. Doubt I make the deadline though. 
>  
> Chuck
>  
> _______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to hang out with me.
> Woodworkers at lists.sawdusters.org <mailto:Woodworkers at lists.sawdusters.org>
> 
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org <http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org>
> 
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org <mailto:woodworkers-owner at lists.sawdusters.org>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20190905/bf2b9fff/attachment.html>


More information about the Woodworkers mailing list