[Woodworkers] Toy chest

gcw804 at aol.com gcw804 at aol.com
Sat Aug 10 18:03:43 PDT 2019


Greg,Nice job.  I built a toy box for a client and was disappointed with the hinge and lid stays too.
It seems like someone could develop a decent hinge for toy boxes.
Gary Williams


-----Original Message-----
From: Greg via Woodworkers <woodworkers at lists.sawdusters.org>
To: A place where woodworkers talk about woodworking <woodworkers at lists.sawdusters.org>
Cc: Greg <dasnipa at gmail.com>
Sent: Sat, Aug 10, 2019 2:56 pm
Subject: [Woodworkers] Toy chest

So, it's been forever since I've gotten some shop time in; but finally over the course of the past month I've worked on and completed a toy chest for my kids.
Frame and panel (M&T) construction. My only disappointment was with the hinge. After taking these photos I disassembled not and returned the hinge. And now I have a set of tortion hinges headed towards me in the mail... But I was so excited I just wanted to go ahead and brag on the outcome..


On Fri, Aug 9, 2019, 7:20 PM Clint Warren via Woodworkers <woodworkers at lists.sawdusters.org> wrote:

Hi, I’m Clint and I’m an old timer. I don’t know when it happened. Gradually I guess, a complaint about cost of a candy bar, then a burger, wood and now it is pretty much everything. Speaking of wood, I bought some finger jointed pine from HD. Pre-primed to use for some painted trim.  Every single piece I ripped down either bowed out or pinched tight on my saw blade.  I can’t figure out how they so consistently screwed up finger jointed material. In my experience this would be bad kiln drying and I would have thought it was dried before the jointing process. It was not cheap either, I only bought it because you can’t normally find decent 1x4 or 1x6 at HD. I can’t believe what they expect you pay for poplar and don’t get me started on walnut or oak. Who prices these things jeeze loweez? I tell you .. wait a minute gotta go chase some kids off the lawn. Sent from Mail for Windows 10 From: Woodworkers <woodworkers-bounces at lists.sawdusters.org> on behalf of Dave Heitstuman via Woodworkers <woodworkers at lists.sawdusters.org>
Sent: Friday, August 9, 2019 1:05:20 PM
To: A place where woodworkers talk about woodworking <woodworkers at lists.sawdusters.org>
Cc: Dave Heitstuman <DaveH at sphcontrols.com>
Subject: [Woodworkers] A lousy 1 x 4 I have been trying to organize and reconnoiter the storage in the garage.  First order of business was to build some better shelving.  Many years ago I literally stumbled on to an idea for a way to make shelves that are surprisingly strong and require no support beyond screwing them to the wall or in this case the studs in the garage.  The principle is so simple any fool can do it.  A 1x4 along the wall, a 1x2 (a full 2” ripped from a 1x4) for the front.  Tapered cross members, running front to back.  I have made shelves as deep as 14” and have loaded them up pretty darn heavy and they don’t sag or pull away from the wall at all. So I ran over to the orange store for some 1x4’s for some new shelves.  $6.67 each. $6.67 cents for a 1 x 4?  $6.67 for crappy 1x4’s.  $6.67 for twisted bowed and otherwise useless 1x4’s.  After sorting through most of the rack I managed to find 8 mostly decent 1x4’s  The gal at the check stand thought she was going to have to do CPR on me when she gave me the total. I get it that things do not cost what they did years ago, it costs more to make it, to transport it, to get it on the rack at HD, but.  $6.67 for a 1x4 that is full of knots and is not flat or straight.  That just does not seem right.  We can all make fun of the old timers that say things like “back in my day” so I guess I have become that old timer.  I can remember buying 1x4’s at a Pay N Pak back in the early 80’s.  Pay N Pak was a NW chain that truly was an early version of HD or Lowes.  You could get 1x4’s for $.69 (yes that is cents) that were straight, clear, and probably graded as #1 or better.   1 x 6’s were $.99 yes 99 cents not quite as clear but they were straight.    I’m done, I just had to get that off my chest.  2Dave  _______________________________________________
I want to be one of my friends for a day so I can see how cool it is to hang out with me.
Woodworkers at lists.sawdusters.org

To unsubscribe from this list -
http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org

Address to contact the list ADMIN staff -
woodworkers-owner at lists.sawdusters.org
_______________________________________________
I want to be one of my friends for a day so I can see how cool it is to hang out with me.
Woodworkers at lists.sawdusters.org

To unsubscribe from this list -
http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org

Address to contact the list ADMIN staff -
woodworkers-owner at lists.sawdusters.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20190811/43dff4fa/attachment-0001.html>


More information about the Woodworkers mailing list