[Woodworkers] a question?

[Steve Bigelow]

Tom,

I'm assuming you have the JML-1014 mini since you upgraded the motor to
variable speed. The JWL-1221VS midi only comes with variable speed from
what I can tell.

If you have the older 1014, then no, it won't fit without the extension. As
John said, the 1221 should fit fine.

Regards,
-Steve

On Mon, Oct 15, 2018 at 10:14 AM John McCaskill via Woodworkers <
woodworkers at lists.sawdusters.org> wrote:

> Tom,
>
> I may be confused about which Jet lathe you have.
> Jet lathe 1221VS
>
> Distance Between Centers: 20-1/2”
>
>
> Beall 3-on lathe buffer
>
> On one end of this 17" mandrel is machined a #2 Morse taper to fit in the
> head stock of your lathe; on the other a center to accept the tail stock.
>
>
> Should fit no problem. I am not home so can’t do any measurements.
>
> I no longer have the Jet midi, but used it on that, a Delta midi, and a
> Colt midi.
>
> I’ll see what other info I can dig up.
>
>
> On Oct 13, 2018, at 8:39 PM, Tom Lovelace via Woodworkers <
> woodworkers at lists.sawdusters.org> wrote:
>
> Yeah, John. Retracted all the way. And cannot fit the Beal shaft into the
> lathe. Need at least another inch and a half. The tailstock mount is just
> too close to insert the Beal shaft. Suppose I will try to mount the
> extension tomorrow without the little metal clop,
>
> On Oct 13, 2018, at 8:34 PM, John McCaskill via Woodworkers <
> woodworkers at lists.sawdusters.org> wrote:
>
> Yes, it fits. Don’t need an extension. Silly question: tailstock retracted?
>
>
>    - Everything is always okay in the end, if it's not, then it's not the
>    end.
>
>
> On Oct 13, 2018, at 7:13 PM, Steve Bigelow via Woodworkers <
> woodworkers at lists.sawdusters.org> wrote:
>
> You probably need the lathe extension.
>
> I have the old style that only turns one wheel at a time.
>
> On Sat, Oct 13, 2018, 5:04 PM Tom Lovelace via Woodworkers <
> woodworkers at lists.sawdusters.org> wrote:
>
>> Is this Beal Buffing System (3 wheels) supposed to fit the Jet midi
>> lathe? I don't seem to be able to install the system without totally
>> removing my tailstock. Needs another couple of inches of space.
>> _______________________________________________
>> I want to be one of my friends for a day so I can see how cool it is to
>> hang out with me.
>> Woodworkers at lists.sawdusters.org
>>
>> To unsubscribe from this list -
>> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>>
>> Address to contact the list ADMIN staff -
>> woodworkers-owner at lists.sawdusters.org
>>
> _______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to
> hang out with me.
> Woodworkers at lists.sawdusters.org
>
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org
>
> _______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to
> hang out with me.
> Woodworkers at lists.sawdusters.org
>
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org
>
>
> _______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to
> hang out with me.
> Woodworkers at lists.sawdusters.org
>
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org
>
> _______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to
> hang out with me.
> Woodworkers at lists.sawdusters.org
>
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20181015/b8c48b86/attachment-0001.html>