[Woodworkers] So I was gifted this bar.

[Richard Allen via Woodworkers]

Hi Doug,

I agree that there has to be some middle ground.  I also like the pattern of the wood.  

Put a coat or two of finish on the top (not to sure about filling the cracks as the wood is likely to continue swell and contract).  However, covering the finished piece, cracks and all, with glass would make a nice looking bar.  

You could fill the cracks with something flexible like silicon caulk.  You should be able to get caulk in black if you like black.  I might consider a bright color like red or blue to feature the cracks instead of trying to hide the cracks.  Covering the top with glass gives a chance to see and celebrate the top.

> On Feb 26, 2016, at 8:15 PM, Doug via Woodworkers <woodworkers at lists.sawdusters.org> wrote:
> 
> So that’s it?  No other suggestions?  I gotta do something here or the GF’s family is going to be pretty disappointed.  They don’t know wood movement and they all came together to get this for me because of my failing health.  My knee jerk reaction was firewood but that’s just not in the cards.  I certainly agree with Mr. Allen, I’m facing an uphill battle here but can probably pull off something to appease the masses.  Richard, please take no offense, but I have to try something, might even put a glass top on or something.  I will for sure  seal it from the back just to try to stabilize it but I’m a little reluctant to go whole hog with the epoxy.  Sure I could put a gallon of west coast against it and may do so but I thought the list would be a little more creative. J
> DIAZ
>  
> From: Woodworkers [mailto:woodworkers-bounces at lists.sawdusters.org] On Behalf Of Doug via Woodworkers
> Sent: Thursday, February 25, 2016 6:04 AM
> To: woodworkers at sawdusters.org
> Subject: [Woodworkers] So I was gifted this bar.
>  
> My girlfriends family decided that considering my health, they would get together and give me a bar. They found this at the Brass Armadillo and as you can see, it is in less than stellar condition. I had to remove the top coat so my buddy could run the top through the big timesaver sander where he works.  Naturally I had to strip the front if I ever hoped to make them match.  This is a homemade piece and I’m sure the guy/girl put a lot of time into making it but unfortunately just wasn’t quite there when it came to wood choices.  I have many large cracks I need to deal with.  He/she even put bondo in one section.  Before I saw how bad the cracks were I had thought of using epoxy and India ink to fill the gaps. I plan to make this much darker (dark walnut) to make it try to match the pieces in the place it is going.  
> My question is, since I have so many cracks to deal with, should I change my strategy and go with a filler or stick with the black epoxy?  
> <image001.jpg>
>  
> <image002.jpg>
>  
> <image003.jpg>
>  
>  
> This email has been sent from a virus-free computer protected by Avast. 
> www.avast.com
>  
> 
> This email has been sent from a virus-free computer protected by Avast. 
> www.avast.com
> _______________________________________________
> Ya know, life is all about perspective; when the Titanic sank it was a miracle to the lobsters in the ship's kitchen
> Woodworkers at lists.sawdusters.org
> 
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20160227/6bfd4633/attachment.htm>