<!doctype html>
<html>
<head>
<meta charset="UTF-8">
</head>
<body>
<div style="font-size: 12pt; font-family: helvetica, arial, sans-serif; color: #333333;"> <span style="font-family: helvetica; font-size: 12pt;">These are adorable. You mentioned the dump truck needing a catch.....what about a bit of hook and loop? Can be obtained in a long roll or as small squares or circles.</span>
<br>
</div>
<div style="font-size: 12pt; font-family: helvetica, arial, sans-serif; color: #333333;" class="default-style"> <span style="font-family: helvetica; font-size: 12pt;"><br></span>
</div>
<div style="font-size: 12pt; font-family: helvetica, arial, sans-serif; color: #333333;" class="default-style"> <span style="font-family: helvetica; font-size: 12pt;">Looks like you are having fun with this. I remember when my Dad made similar toys for family. He also went 'fancy' and made a replica of a semi for an uncle who owned a small truck line.<br></span>
</div>
<div style="font-size: 12pt; font-family: helvetica, arial, sans-serif; color: #333333;" class="default-style"> <span style="font-family: helvetica; font-size: 12pt;"><br></span>
</div>
<div style="font-size: 12pt; font-family: helvetica, arial, sans-serif; color: #333333;" class="default-style"> <span style="font-family: helvetica; font-size: 12pt;">Thanks for sharing,<br></span>
</div>
<div style="font-size: 12pt; font-family: helvetica, arial, sans-serif; color: #333333;" class="default-style"> <span style="font-family: helvetica; font-size: 12pt;">Karen<br></span>
</div>
<blockquote type="cite">
<div>
On 04/10/2023 1:14 PM Dave Heitstuman via Woodworkers <woodworkers@lists.sawdusters.org> wrote:
</div>
<div>
<br>
</div>
<div>
<br>
</div>
<div class="WordSection1">
<p class="MsoNormal">Last month I asked about plans for some wooden vehicles I could make for charity. Mike DeLong managed to get the floodgates opened up better than my searches had. I went with some plans for some trucks that I hope will be a big hit. And Mikes suggestion for the Freaky Fords. I have started with the 4 trucks that will be made. They all use the same basic chassis, the only difference is the length. Since this will hopefully be a bit of a group effort I wanted to get things ironed out and get some mock-ups made to use as guides. I have added my own take on the design for a water or tank truck and I have built the dump truck. Interestingly I have found a couple of flaws with hole sizing in the plans. I have started making notes to correct them once we start mass producing them. At this point I’m having fun, we’ll see where I’m at after producing a bunch more</p>
<p class="MsoNormal"><br></p>
<div>
<div>
<p style="margin-bottom: 12.0pt;" class="MsoNormal">First the basic truck chassis. A piece of 1x4 cut down to 2.5 inches wide and a piece of 2x4 cut down for the cab. The Wheels and axles were purchased. </p>
</div>
</div>
<div>
<p class="MsoNormal"><img src="cid:image001.jpg@01D96B98.068E7260" id="Picture_x0020_1" style="width: 4.2291in; height: 5.6354in;" width="406" height="541"></p>
</div>
<div>
<div>
<p style="margin-bottom: 12.0pt;" class="MsoNormal"><br><br></p>
<p style="margin-bottom: 12.0pt;" class="MsoNormal">Next my idea, was for a tank or water truck if you will. Other than the cost of the 2.5” dowel* these can be knocked out pretty fast. </p>
</div>
</div>
<div>
<p class="MsoNormal"><img src="cid:image002.jpg@01D96B98.068E7260" id="Picture_x0020_2" style="width: 4.1458in; height: 5.5312in;" width="398" height="531"></p>
</div>
<div>
<div>
<p style="margin-bottom: 12.0pt;" class="MsoNormal"><br></p>
<p style="margin-bottom: 12.0pt;" class="MsoNormal">Then the dump truck. These really need a magnet or catch of some sort but I have to let those kinds of things go for something like this. </p>
</div>
</div>
<div>
<p class="MsoNormal"><img src="cid:image003.jpg@01D96B98.068E7260" id="Picture_x0020_3" style="width: 4.0208in; height: 5.3645in;" width="386" height="515"></p>
</div>
<div>
<div>
<p style="margin-bottom: 12.0pt;" class="MsoNormal"><br>I did downsize the bed of the dump truck, it was called out to be 3/4” thick but it was just over powering to me so I made it 1/2" </p>
</div>
</div>
<div>
<p class="MsoNormal"><img src="cid:image004.jpg@01D96B98.068E7260" id="Picture_x0020_4" style="width: 3.927in; height: 5.2291in;" width="377" height="502"></p>
</div>
<div>
<div>
<p class="MsoNormal"><br>*Doweling. I found a place out of New York that had some dang good pricing on wood dowels. Buying in bulk they are cheaper than the HD or Lowes on the small stuff. Of course if these trucks don’t work out I will have a lifetime supply of 3/16” and 1/4" doweling <span style="font-family: Wingdings;">L</span></p>
<p class="MsoNormal"><br></p>
<p class="MsoNormal">The 2” and 2.5’ I needed are ash good looking pieces and cheaper than I could get locally. No sales, offset the freight so all in all I hope I am $$$ ahead.</p>
<p class="MsoNormal"><br></p>
<p class="MsoNormal">2Dave<br><br><br></p>
</div>
</div>
</div>_______________________________________________
<br>I want to be one of my friends for a day so I can see how cool it is to hang out with me.
<br>Woodworkers@lists.sawdusters.org
<br>
<br>To unsubscribe from this list -
<br>http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
<br>
<br>Address to contact the list ADMIN staff -
<br>woodworkers-owner@lists.sawdusters.org
<br>
</blockquote>
</body>
</html>