<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40"><head><meta http-equiv=Content-Type content="text/html; charset=utf-8"><meta name=Generator content="Microsoft Word 15 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:"Brush Script MT";
panose-1:3 6 8 2 4 4 6 7 3 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
font-size:11.0pt;
font-family:"Calibri",sans-serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
span.EmailStyle19
{mso-style-type:personal-reply;
font-family:"Arial",sans-serif;
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]--></head><body lang=EN-US link="#0563C1" vlink="#954F72" style='word-wrap:break-word'><div class=WordSection1><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'>Rick and Dave,<o:p></o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'> Thanks! When I first started resawing I used a single point fence. Basically, I attached a big dowl to the fence so you follow your line regardless of drift. This does work but it almost guarantees a ripple cut. I do have aftermarket fences on my BS’s to allow for drift. There are several articles on how to determine drift and then adjust your fence for it. However, I prefer not to do that and use my fence at 90 degrees. Mainly because with my ½” blade it cut true so I know it can be done. My problem with the ½” blade is it works well on not wide boards but really wasn’t designed for resawing wide boards. It did well on the one wide board cut but was the gullets were full and severely caked. I had to soak the blade in blade cleaner to clean it (i.e. a brass brush wouldn’t clean it without soaking).<o:p></o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'> So having said that, Scott Phillips said an interesting thing in his video – if you have drift, you have ruined the set on your blade. I wonder if that’s why one ¾” blade drifts like crazy but the other ¾” blade cut true (slow, but true). BTW, I watch all the WW shows on TV too </span><span style='font-size:14.0pt;font-family:"Segoe UI Emoji",sans-serif'>😊</span><span style='font-size:14.0pt;font-family:"Arial",sans-serif'>. With regard to tensioning – I also over tension (example: my ¾” blade was tensioned to 1”). What I’ve read is you tension it until it starts to flutter and then back off a few turns to eliminate the flutter. That’s what I did on my other ¾” blade and the surfaces on both boards were pretty nice. But, again, is that because of the set.<o:p></o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'> Thank you for your responses!!<o:p></o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'><o:p> </o:p></span></p><div><p class=MsoNormal><span style='font-size:18.0pt;font-family:"Brush Script MT"'>Chuck<o:p></o:p></span></p></div><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'><o:p> </o:p></span></p><div><div style='border:none;border-top:solid #E1E1E1 1.0pt;padding:3.0pt 0in 0in 0in'><p class=MsoNormal><b>From:</b> Rick Allen <rla_buy@yahoo.com> <br><b>Sent:</b> Saturday, May 01, 2021 7:42 AM<br><b>To:</b> woodworkers@sawdusters.org<br><b>Cc:</b> chuck.steger@gmail.com<br><b>Subject:</b> Re: [Woodworkers] Resawing<o:p></o:p></p></div></div><p class=MsoNormal><o:p> </o:p></p><div><p class=MsoNormal>I have never been taught how to resaw and this is my “made up way” of doing it. Also I don’t resaw very much, maybe 20 bf a year. No doubt there are better methods.<o:p></o:p></p></div><div><p class=MsoNormal><o:p> </o:p></p></div><div><p class=MsoNormal>My understanding of drift is to account for the drift as yo cut by adjusting the angle of attack. The only pressure on the board as you cut is at the pushing end of the board. A lot of folks like to use a fence and press the board against the fence as they cut. I find that doing so causes the blade to bow in the wood. I like the pressure at the cut to be neutral except for the push from the end of the board.<o:p></o:p></p></div><div><p class=MsoNormal><o:p> </o:p></p></div><div><p class=MsoNormal style='margin-bottom:12.0pt'>On Apr 30, 2021, at 10:34 PM, chuck.steger--- via Woodworkers <<a href="mailto:woodworkers@lists.sawdusters.org">woodworkers@lists.sawdusters.org</a>> wrote:<o:p></o:p></p></div><div><p class=MsoNormal><o:p></o:p></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'>I’m going to respond to my own post and ask a question. I made 2 changes, I cut the width of the board down and used my other BS with a ¾” 3 tpi hook tooth blade (different BS blade lengths so different blade). This worked. But, I noticed when I cut the wide board, it cut fast and easy (albeit, drifting) and the new cut was on the line but cut slower. I had to the clean the blade with a brass brush after each cut because the saw dust from the rosewood was caked on the blade. Tedious but worth the effort to get a good clean cut (no drift at all). </span><o:p></o:p></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'>So the question is, if you over tension a blade does that cause drift? Because my only 2 culprits are blade sharpness and tension, right?</span><o:p></o:p></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'> </span><o:p></o:p></p><div><p class=MsoNormal><span style='font-size:18.0pt;font-family:"Brush Script MT"'>Chuck</span><o:p></o:p></p></div><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'> </span><o:p></o:p></p><div><div style='border:none;border-top:solid #E1E1E1 1.0pt;padding:3.0pt 0in 0in 0in'><p class=MsoNormal><b>From:</b> <a href="mailto:chuck.steger@gmail.com">chuck.steger@gmail.com</a> <<a href="mailto:chuck.steger@gmail.com">chuck.steger@gmail.com</a>> <br><b>Sent:</b> Friday, April 30, 2021 9:59 AM<br><b>To:</b> <a href="mailto:woodworkers@sawdusters.org">woodworkers@sawdusters.org</a><br><b>Subject:</b> Resawing<o:p></o:p></p></div></div><p class=MsoNormal> <o:p></o:p></p><p class=MsoNormal><span style='font-size:12.0pt;font-family:"Arial",sans-serif'>I have a couple of band saws where I keep a ¼” blade on one and a ½” blade for resawing on the other (yeah, lazy!). In the past I would use a wider blade for resawing but really liked the ½” 6 TPI blade so I kept it on. Yesterday I was resawing a 11” wide by 14” long piece of Bolivian Rosewood (real dense wood). I used the ½” blade and it was slow going but never drifted and cut beautifully. In fact, that’s why I use this blade – no drift. However, when I was finished and looked at the blade, the gullets were full, the blade was caked with saw dust and I honestly was surprised it did so well. So, I changed to a ¾” 3 TPI hook tooth blade. It cut much faster and easier but drifted like a son of a gun. In fact, it drifted so badly, it ruined the piece. The good news is I needed a thinner piece, so that became the thinner piece. But, when I was sanding both pieces on the drum sander it was obvious how badly it drifted. Because the previous blade cut to the line with no drift, I could cut 1/16” over my finished thickness. However, with the ¾” blade, I couldn’t. So, I marked a ½” line to get a finished 3/8” thickness. As I monitored the cut, it was drifting so badly, I had to stop or it would have cut into my 3/8” thickness. BTW, it drifted at the bottom and I was monitoring the top which is why I didn’t see it the first time.</span><o:p></o:p></p><p class=MsoNormal><span style='font-size:12.0pt;font-family:"Arial",sans-serif'>So, all that to ask why the drift? Is the blade not sharp enough (I had used it before so maybe dull?), not tensioned enough, or ???? I think it was tensioned enough but I still throw it out there as a question. Why would the ½” cut so beautifully and the ¾” cut so badly? I cleaned up the ½” and was tempted to put it back on but I don’t want to because it’s really not designed to do what I was doing.</span><o:p></o:p></p><p class=MsoNormal><span style='font-size:12.0pt;font-family:"Arial",sans-serif'>One thing I’m going to try today it to cut the 11” width down to a narrower piece (that I would need anyway) and try resawing a narrower piece.</span><o:p></o:p></p><p class=MsoNormal><span style='font-size:12.0pt;font-family:"Arial",sans-serif'>I ordered new blades but, of course, they won’t be here for a few days and I want to resaw today.</span><o:p></o:p></p><p class=MsoNormal><span style='font-size:12.0pt;font-family:"Arial",sans-serif'> </span><o:p></o:p></p><p class=MsoNormal><span style='font-size:18.0pt;font-family:"Brush Script MT"'>Chuck</span><o:p></o:p></p><p class=MsoNormal> <o:p></o:p></p><p class=MsoNormal>_______________________________________________<br>I want to be one of my friends for a day so I can see how cool it is to hang out with me.<br><a href="mailto:Woodworkers@lists.sawdusters.org">Woodworkers@lists.sawdusters.org</a><br><br>To unsubscribe from this list -<br><a href="http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org">http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org</a><br><br>Address to contact the list ADMIN staff -<br><a href="mailto:woodworkers-owner@lists.sawdusters.org">woodworkers-owner@lists.sawdusters.org</a><o:p></o:p></p></div></div></body></html>