<div dir="ltr">I'd probably do this by hand with a file. I have an air powered file that would work well.<div><br></div><div>But, if you were trying to do this with a template, to create the template, lay the wood down on a photocopy machine and make a copy. Then you can glue the paper to a piece of MDF or whatever you are using for your template. Then, cut the template out with a scroll saw and sand as needed.<br><div class="gmail_extra"><br></div><div class="gmail_extra">If you want to get fancy, you could scan in the photocopy, create a DXF, import that into your favorite CAD software, manipulate it, then output gcode to a CNC.... </div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div>Regards,<br>-Steve<br><a href="http://woodworking.bigelowsite.com" target="_blank">http://woodworking.bigelowsite.com</a><br></div><a href="http://pen-blanks.us" target="_blank">http://pen-blanks.us</a><br></div></div></div>
<br></div></div></div>