[Woodworkers] Dirty Wood

Ron Odum rodum233 at gmail.com
Tue Mar 29 15:24:59 PDT 2022


Agreed..My shop brooms were not course enough. I think I'll use the
combination broom Brush, vacuum and then run through Performax Drum
Sander.... As soon as my replacement conveyer belt gets here. Old one had
dry rotted.. I may epoxy it back together for this chore.

On Tue, Mar 29, 2022, 5:00 PM Dave Heitstuman via Woodworkers <
woodworkers at lists.sawdusters.org> wrote:

> I would think a course push broom and then a good vacuum.  The only
> question is can you still buy a course broom?  My dad had a couple that I
> now have, lay the boards on the ground and give a good brooming then vacuum
> off the loose stuff.    Something like this maybe??
>
>
>
>
> https://www.uline.com/Product/Detail/H-6424/Brooms-and-Brushes/Street-Broom?pricode=WB0019&gadtype=pla&id=H-6424&gclid=EAIaIQobChMI08-Klqfs9gIV1Rx9Ch1zmQeAEAQYASABEgIKa_D_BwE&gclsrc=aw.ds
>
>
>
>
>
> *From:* Woodworkers [mailto:woodworkers-bounces at lists.sawdusters.org] *On
> Behalf Of *Ron Odum via Woodworkers
> *Sent:* Tuesday, March 29, 2022 12:19 PM
> *To:* woodworkers at sawdusters.org
> *Cc:* Ron Odum <rodum233 at gmail.com>
> *Subject:* [Woodworkers] Dirty Wood
>
>
>
> The stack of red oak I bought awhile back has a large number of boards
> that are dirty from a sandy soil.. I've brushed, vacuumed and blew off with
> compressed air.. A time consuming task..What's the group thoughts getting
> the boards clean?  I've considered pressure washing..Dont know what that
> would do to moisture content.. 13.6% now.. Or.. Bushing & Vacuuming..
> THEN..using my old planer blades, run them through. I believe this may
> remove the crud and I can always resurface with the new blades when I use
> them.. Hairbrained idea???
>
> I'm open to ideas and suggestions.
> _______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to
> hang out with me.
> Woodworkers at lists.sawdusters.org
>
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20220329/56527d88/attachment.html>


More information about the Woodworkers mailing list