[Woodworkers] Planer Question.

[chuck.steger at gmail.com]

T9 (Boeshield made by Boeing) is used on TS gears. It’s a dry lube so sawdust won’t accumulate on it.

 

Chuck

 

From: Woodworkers <woodworkers-bounces at lists.sawdusters.org> On Behalf Of Gary C Williams via Woodworkers
Sent: Friday, March 25, 2022 3:41 PM
To: woodworkers at sawdusters.org
Cc: gcw804 at aol.com
Subject: Re: [Woodworkers] Planer Question.

 

Ron 

 

The manual doesn't say anything about greasing the gears. I would probably apply some grease just to the gears and I think it will transfer to the chain.

 

I would be careful so as to not so much grease on the gears that they pickup a lot of sawdust.

 

Gary Williams





-----Original Message-----
From: Ron Odum via Woodworkers <woodworkers at lists.sawdusters.org <mailto:woodworkers at lists.sawdusters.org> >
To: woodworkers at sawdusters.org <mailto:woodworkers at sawdusters.org> 
Cc: Ron Odum <rodum233 at gmail.com <mailto:rodum233 at gmail.com> >
Sent: Fri, Mar 25, 2022 4:29 pm
Subject: [Woodworkers] Planer Question.

Doing a clean and minor over haul on my Delta 12 1/2 planer.. It had grease on the drive gears that I've cleaned off and will replace. What about the drive chain? Should it be greased or should I use some oil.? Thanks

_______________________________________________
I want to be one of my friends for a day so I can see how cool it is to hang out with me.
Woodworkers at lists.sawdusters.org <mailto:Woodworkers at lists.sawdusters.org> 

To unsubscribe from this list -
http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org

Address to contact the list ADMIN staff -
woodworkers-owner at lists.sawdusters.org <mailto:woodworkers-owner at lists.sawdusters.org> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20220325/86fa0638/attachment.html>