[Woodworkers] Windows & Thin Strip Rip Jig

gcw804 at aol.com gcw804 at aol.com
Fri Jun 17 09:45:13 PDT 2022


I need to make 4 more windows for a garage like the ones attached. The windows are simulated divided lite with mullions on the inside and the outside.
I wanted a thin rip jig to ensure that the mullions were are the same width.
I had some left over Birdseye Maple and Mahogany so I made the one attached.
I think it will work pretty well.
Gary Williams
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20220617/a5fa85b4/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Garage Windows.jpg
Type: image/jpeg
Size: 37098 bytes
Desc: not available
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20220617/a5fa85b4/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Thin Rip Jig.jpg
Type: image/jpeg
Size: 25065 bytes
Desc: not available
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20220617/a5fa85b4/attachment-0003.jpg>


More information about the Woodworkers mailing list