[Woodworkers] Kerf measurement

Steve Bigelow sbig333 at gmail.com
Mon Sep 10 09:35:52 PDT 2018


Vince,

Typically you can't measure the width of two opposite teeth properly. So,
you measure blade + teeth, multiply by 2, then subtract out the width of
just the blade.

Regards,
-Steve
http://woodworking.bigelowsite.com
http://pen-blanks.us


On Mon, Sep 10, 2018 at 8:06 AM Vince Granacher via Woodworkers <
woodworkers at lists.sawdusters.org> wrote:

> If the tooth is wider than the body of the blade, wouldn't multiplying it
> by two give a false kerf?  Wouldn't you want to just measure the width of
> the teeth with the calipers?  I'm not sure, just wanting to understand.
>
> Vince Granacher
>
> On Sun, 9 Sep 2018 22:26:18 -0700, Steve Bigelow via Woodworkers
> <woodworkers at lists.sawdusters.org> wrote:
> > Typically the blade has a kerf written on it. Other than that, you can
> > use some calipers to measure the blade, then measure the blade + tooth.
> > Kerf = 2*(blade + tooth) - blade
> >
> > On Sun, Sep 9, 2018 at 8:54 PM Tom Lovelace via Woodworkers  wrote:
> > Is there a better method of measuring the width of a saw kerf instead
> > using mutiple feeler gauges (automotive)?
> >  Thanks
> >  TomL
> >  _______________________________________________
> >  I want to be one of my friends for a day so I can see how cool it is to
> > hang out with me.
> >  Woodworkers at lists.sawdusters.org [2]
> >
> >  To unsubscribe from this list -
> >  http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org [3]
> >
> >  Address to contact the list ADMIN staff -
> >  woodworkers-owner at lists.sawdusters.org [4]
> >
> >
> > Links:
> > ------
> > [1] mailto:woodworkers at lists.sawdusters.org
> > [2] mailto:Woodworkers at lists.sawdusters.org
> > [3] http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
> > [4] mailto:woodworkers-owner at lists.sawdusters.org
> _______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to
> hang out with me.
> Woodworkers at lists.sawdusters.org
>
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
>
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20180910/35d32157/attachment.html>


More information about the Woodworkers mailing list