[Woodworkers] a question?

[Tom Lovelace]

No problem, John. Have the Jet with with the 14 inch bed. But I also have the bed extension . Bought it at the same time as the lathe. But never hooked it up until this afternoon. Guess that will be my afternoon job in the shop.Thanks for the assist. !!
Tom

> On Oct 15, 2018, at 9:45 AM, John McCaskill via Woodworkers <woodworkers at lists.sawdusters.org> wrote:
> 
> Tom, 
> 
> I may be confused about which Jet lathe you have. 
> Jet lathe 1221VS
> Distance Between Centers: 20-1/2”
> 
> Beall 3-on lathe buffer 
> On one end of this 17" mandrel is machined a #2 Morse taper to fit in the head stock of your lathe; on the other a center to accept the tail stock. 
> 
> Should fit no problem. I am not home so can’t do any measurements. 
> 
> I no longer have the Jet midi, but used it on that, a Delta midi, and a Colt midi. 
> 
> I’ll see what other info I can dig up. 
> 
> 
> On Oct 13, 2018, at 8:39 PM, Tom Lovelace via Woodworkers <woodworkers at lists.sawdusters.org <mailto:woodworkers at lists.sawdusters.org>> wrote:
> 
>> Yeah, John. Retracted all the way. And cannot fit the Beal shaft into the lathe. Need at least another inch and a half. The tailstock mount is just too close to insert the Beal shaft. Suppose I will try to mount the extension tomorrow without the little metal clop,
>> 
>>> On Oct 13, 2018, at 8:34 PM, John McCaskill via Woodworkers <woodworkers at lists.sawdusters.org <mailto:woodworkers at lists.sawdusters.org>> wrote:
>>> 
>>> Yes, it fits. Don’t need an extension. Silly question: tailstock retracted?
>>> 
>>> Everything is always okay in the end, if it's not, then it's not the end.
>>> 
>>> On Oct 13, 2018, at 7:13 PM, Steve Bigelow via Woodworkers <woodworkers at lists.sawdusters.org <mailto:woodworkers at lists.sawdusters.org>> wrote:
>>> 
>>>> You probably need the lathe extension.
>>>> 
>>>> I have the old style that only turns one wheel at a time.
>>>> 
>>>> On Sat, Oct 13, 2018, 5:04 PM Tom Lovelace via Woodworkers <woodworkers at lists.sawdusters.org <mailto:woodworkers at lists.sawdusters.org>> wrote:
>>>> Is this Beal Buffing System (3 wheels) supposed to fit the Jet midi lathe? I don't seem to be able to install the system without totally removing my tailstock. Needs another couple of inches of space.
>>>> _______________________________________________
>>>> I want to be one of my friends for a day so I can see how cool it is to hang out with me.
>>>> Woodworkers at lists.sawdusters.org <mailto:Woodworkers at lists.sawdusters.org>
>>>> 
>>>> To unsubscribe from this list -
>>>> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org <http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org>
>>>> 
>>>> Address to contact the list ADMIN staff -
>>>> woodworkers-owner at lists.sawdusters.org <mailto:woodworkers-owner at lists.sawdusters.org>
>>>> _______________________________________________
>>>> I want to be one of my friends for a day so I can see how cool it is to hang out with me.
>>>> Woodworkers at lists.sawdusters.org <mailto:Woodworkers at lists.sawdusters.org>
>>>> 
>>>> To unsubscribe from this list -
>>>> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org <http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org>
>>>> 
>>>> Address to contact the list ADMIN staff -
>>>> woodworkers-owner at lists.sawdusters.org <mailto:woodworkers-owner at lists.sawdusters.org>_______________________________________________
>>> I want to be one of my friends for a day so I can see how cool it is to hang out with me.
>>> Woodworkers at lists.sawdusters.org <mailto:Woodworkers at lists.sawdusters.org>
>>> 
>>> To unsubscribe from this list -
>>> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org <http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org>
>>> 
>>> Address to contact the list ADMIN staff -
>>> woodworkers-owner at lists.sawdusters.org <mailto:woodworkers-owner at lists.sawdusters.org>
>> _______________________________________________
>> I want to be one of my friends for a day so I can see how cool it is to hang out with me.
>> Woodworkers at lists.sawdusters.org <mailto:Woodworkers at lists.sawdusters.org>
>> 
>> To unsubscribe from this list -
>> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org <http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org>
>> 
>> Address to contact the list ADMIN staff -
>> woodworkers-owner at lists.sawdusters.org <mailto:woodworkers-owner at lists.sawdusters.org>_______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to hang out with me.
> Woodworkers at lists.sawdusters.org
> 
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
> 
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20181015/002342fb/attachment.html>