[Woodworkers] Different saw

[John McCaskill]

Looks like there are two notches, so if the rod had, for example, 3/4”-16 threads, then one half turn would move the stop 1/32”. So, fairly fine adjustment. 

John

Of course I talk to myself, sometimes I need expert advice.

A life? Cool! Where can I download one of those from?


On Jan 12, 2018, at 7:37 PM, Tom Lovelace via Woodworkers <woodworkers at lists.sawdusters.org> wrote:

> Just watched a video on Youtube and A very different method of making minor adjustments of the tablesaw fence.
> Anyone ever ran across an item like this? It sees to be a one inch threaded rod that goes across the front edge of the saw.
> The operator just turns a  knob located at the left end of the rod to make minor adjustments. See the two picts:  Sure looks shop-made?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screen Shot 2018-01-12 at 7.23.34 PM.png
Type: image/png
Size: 356246 bytes
Desc: not available
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20180112/92114194/attachment-0002.png>
-------------- next part --------------
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screen Shot 2018-01-12 at 7.24.38 PM.png
Type: image/png
Size: 304138 bytes
Desc: not available
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20180112/92114194/attachment-0003.png>
-------------- next part --------------
> 
> 
> _______________________________________________
> I want to be one of my friends for a day so I can see how cool it is to hang out with me.
> Woodworkers at lists.sawdusters.org
> 
> To unsubscribe from this list -
> http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org
> 
> Address to contact the list ADMIN staff -
> woodworkers-owner at lists.sawdusters.org