[Woodworkers] a question about glass

[Clint Warren via Woodworkers]

Come to think of it I bought one of those repeater things as well for some project that never happened.  Scott if you want it (and I can find it) I'd be happy to send it to you.



 clint
 
 



Date: Thu, 6 Oct 2016 21:06:14 -0500
To: woodworkers at sawdusters.org
Subject: Re: [Woodworkers] a question about glass
From: woodworkers at lists.sawdusters.org

Depends. IR needs some visibility, although as Joe said, usually work through smoked glass. RF needs none, but your devices need to be able to accept it. 
I've got a repeater that receives an RF signal and then transmits an IR signal to the components. It can work behind solid doors. The placement of the repeater signal transmitter is tricky on some devices. It has to be "just so" over the IR receiver on the device. 

John
Everything is always okay in the end, if it's not, then it's not the end.
On Oct 6, 2016, at 8:49 PM, Joe Johns via Woodworkers <woodworkers at lists.sawdusters.org> wrote:

On Thu, Oct 6, 2016 at 7:40 PM, Smitty wrote:

I’m building a TV cabinet. I want to put the cable box, Blueray, etc. in a lower cabinet behind glass. Anybody know how frosted, smoked or textured you can go and still get the remote to work on all of the devices?
​I used smoked on the unit I built - nary a problem.
-- 
Joe,
The Twisted Knot Woodshop, "There's never been a classier joint"Visit the Twisted Knot Woodshop - http://www.twistedknotwoodshop.com

_______________________________________________
Ya know, life is all about perspective; when the Titanic sank it was a miracle to the lobsters in the ship's kitchen
Woodworkers at lists.sawdusters.org

To unsubscribe from this list -
http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org

Address to contact the list ADMIN staff -
woodworkers-owner at lists.sawdusters.org
_______________________________________________
Ya know, life is all about perspective; when the Titanic sank it was a miracle to the lobsters in the ship's kitchen
Woodworkers at lists.sawdusters.org

To unsubscribe from this list -
http://lists.sawdusters.org/listinfo.cgi/woodworkers-sawdusters.org

Address to contact the list ADMIN staff -
woodworkers-owner at lists.sawdusters.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20161006/8f72a810/attachment-0001.htm>