[Woodworkers] Wondering....

[dopauls at gmail.com]

Personally, I would have flipped the drill press upside down, then pressed the board into the spindle.

Doug Pauls

From: Clint Warren
Sent: Thursday, December 1, 2016 7:18 PM
To: A place where woodworkers talk about woodworking
Subject: Re: [Woodworkers] Wondering....

This is why I went with the bench-top model.  Just getting too old to lug the floor model around anymore.

From: Woodworkers <woodworkers-bounces at lists.sawdusters.org> on behalf of Thomas E Lovelace <t.lovelace at icloud.com>
Sent: Thursday, December 1, 2016 5:55 PM
To: Wood Forum
Subject: [Woodworkers] Wondering.... 
 
Is there an easier method of driving a hole? 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20161201/9d2ceb18/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: A4854D6AA06B4529A87C8FC88C87783B.png
Type: image/png
Size: 161 bytes
Desc: not available
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20161201/9d2ceb18/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: EFED395752D64A4196B6D0A6A1BB5066.jpg
Type: image/jpeg
Size: 40468 bytes
Desc: not available
URL: <http://lists.sawdusters.org/pipermail/woodworkers-sawdusters.org/attachments/20161201/9d2ceb18/attachment-0001.jpg>